Determining ethernet MAC address from Open Boot prompt

Today I had a need to jumpstart SunFire V240 using network interface in one of its PCI slots. In order to do that I need to find the MAC address of that interface, preferably with least amount of hassle. There was no Solaris installed and all I had was ok prompt. So I took a quick look at device aliases:

{1} ok devalias
xnet2                    /pci@1d,700000/pci@1/SUNW,hme@0,1:dhcp,
xnet1                    /pci@1e,600000/pci@3/SUNW,hme@0,1:dhcp,
xnet                     /pci@1e,600000/pci@2/SUNW,hme@0,1:dhcp,
net3                     /pci@1d,700000/network@2,1
net2                     /pci@1d,700000/network@2
net1                     /pci@1f,700000/network@2,1
net                      /pci@1f,700000/network@2
cdrom                    /pci@1e,600000/ide@d/cdrom@0,0:f
ide                      /pci@1e,600000/ide@d
disk3                    /pci@1c,600000/scsi@2/disk@3,0
disk2                    /pci@1c,600000/scsi@2/disk@2,0
disk1                    /pci@1c,600000/scsi@2/disk@1,0
disk0                    /pci@1c,600000/scsi@2/disk@0,0
disk                     /pci@1c,600000/scsi@2/disk@0,0
scsi                     /pci@1c,600000/scsi@2
sc-control               /pci@1e,600000/isa@7/rmc-comm@0,3e8
ttyb                     /pci@1e,600000/isa@7/serial@0,2e8
ttya                     /pci@1e,600000/isa@7/serial@0,3f8
name                     aliases

Starting with first net* alias I did:

{1} ok cd /pci@1d,700000
{1} ok ls
f00f8dac network@1
f00b3274 network@2,1
f00acbf4 network@2
{1} ok cd network@1
{1} ok ls
{1} ok pwd
{1} ok .properties
assigned-addresses       82000810 00000000 00600000 00000000 00200000
82000830 00000000 00100000 00000000 00100000
d-fru-len                00000000
d-fru-off                0000e800
d-fru-dev                eeprom
s-fru-len                00000800
s-fru-off                0000e000
s-fru-dev                eeprom
compatible               pci108e,abba.11
reg                      00000800 00000000 00000000 00000000 00000000
02000810 00000000 00000000 00000000 00200000
02000830 00000000 00000000 00000000 00100000
address-bits             00000030
max-frame-size           00004000
device_type              network
name                     network
local-mac-address        00 03 ba 4d b3 3f
version                  Sun PCI Gigaswift Base-X FCode 2.6 01/09/27
phy-type                 pcs
board-model              501-5524
model                    SUNW,pci-ce
fcode-rom-offset         00000000
devsel-speed             00000002
latency-timer            00000040
cache-line-size          00000010
max-latency              00000040
min-grant                00000040
interrupts               00000001
class-code               00020000
revision-id              00000011
device-id                0000abba
vendor-id                0000108e

The MAC address of the network interface is shown in local-mac-address field above. All it took then was following boot command to get jumpstart going:

{1} ok boot /pci@1d,700000/network@1 -v - install nowin